OM1411 [EoS HO VMAP 10G]

Download Datasheet The OM1411Virtual ASSP is an highly integrated, ultra compact 10Gb/s, High Order Ethernet over Sonet/SDH Packet Mapper targeted to the Xilinx Virtex 5 family. 10Gb/s of channelized Ethernet is transported over Sonet/SDH (EOS) using standards complaint GFP-F, VCAT and LCAS. The 'packet' interface is SPI4.2 and supports 192 channels allowing more individual customers to be handled on a single device further reducing opex. The 'Sonet/SDH' interface is 10Gb/s 1+1 protected TFI5 interface for high reliability carrier grade deployments. The OM1411 handles both 'Real Concatenation' (CCAT) and 'Virtual Concatenation' (VCAT).

In addition, LCAS is supported to allow group bandwidth to be hitlessly increased or decreased as customer need dictates. The OM1411 has been designed from the ground up as cost effective ASSP replacement in an FPGA – ultra-compact IP targeting the lowest cost FPGA, highly integrated design with CDR, Framer, Mapper and SPI4.2 interface in a single package, 32bit wide DDR2 for external packet buffer and external differential delay memory (up to 64ms), Software Device Driver and on-chip debugger and supporting toolchain - all lower cost and accelerate TTM.

Typical applications are in Metro Core head end products supporting many EOS VCAT/GFP streams from multiple Access Network customers into a single 10GbE stream for handoff to the Data Core Network.

 

Backplane Interfaces

  • 2 x 10G TFI5 supporting 1+1 Equipment Protection.

Network Interfaces

  • 10G - SPI4.1 622Mhz LVDS for direct connection to NPU or TM.

Sonet/SDH

  • Sonet/SDH G.707/T1.105 compliant.
  • SDH Mappings - AU4-64c, 16c, 4c, AU4, AU3 and AU4/TU3.
  • Sonet Mappings – STS1, STS1-3c, 12c, 48c, 192c SPE
  • SDH Payloads - VC3, VC4, VC4-4c, 16c, 64c
  • Sonet Payloads - STS1, STS1-3c, 12c, 48c, 192c
  • Full SOH & POH Processing.
  • Overhead Insert/Extract over external bus for mate to mate or linecard to switch signalling.

GFP/VCAT/LCAS

  • 192 VCAT Groups (10G), individually rate configurable.
  • GFP-F (G.7041), Mapping support.
  • VCAT Payloads STS1, STS1-3c, VC3 and VC4.
  • 'Any to any' payload to VCAT group assignment.
  • 64ms differential delay using external low-cost DDR2 memory.
  • LCAS support (ITU G.7042) for hitless dynamic bandwidth adjustment.
  • LCAS to non-LCAS interworking.
  • Support for Client Management Frames.

Ethernet

  • SPI4.2 Channelised Interface.
  • External packet buffer in low cost DDR2 memory.
  • Jumbo Frame support.

OAM

  • 16 bit OAM Bus for configuration, performance monitoring, alarm reporting and event reporting.

 

Click here to download the OM1411 Datasheet